Hi! On a energy simulation, how can I consider the HVAC, lighting and occupancy on spaces that will be used by the tenants in the future? Thanks

Hello! We have a canteen project in Shanghai. The building has three floors, total GFA is 64,067 square feet. The baseline HVAC system type is system 6.

I am in the process of simulating 7 floor office building. Five of these floors are designed as open space offices, the others are designed as small offices.

Hello, I made model using eQuest 3.65 and after simulation, baseline building generation and results compliance I see 55 % percent improvement in proposed design against the baseline design. This

Hi, We have Core & Shell project while calculating the area of the locations, Pif and EAp2 have difference approximately 4% please let us know what is the maximum percentage deviation. Thank y

Edit: question has already been answered in February 2012 here: http://www.leeduser.com/credit/CI-2009/EAp2 Didn't find it before, sorry for any confusion. Dear all, on several spots in the Ref Gu

For baseline HVAC system #8 modeled with purchased chilled water according to Option 1 of Treatment of District or Campus Thermal Energy in LEED v2 and LEED 2009 guideline, does the Chilled-Water S

We have a mixed use facility that is 34% hotel, 34% office, and 32% parking garage.

Dear all, our previous version of the baseline model in a C&S building had the same ventilation rates than the proposed.

I have a question about Mandatory provision 6.4.1.1 Equipment efficiency. Our project is a LEED Core and Shell project and a retail centre, 500 000 foot2.