See LEEDuser’s guidance on CI-2009 IEQc4.1 »
Post a question or comment
Credit Filters
Low-Emitting Materials—Adhesives and Sealants
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

VOC requirements of Non Shrink Grount under Structural Steel column Base plates

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Hari krishnan  on 

Hi

1
Mon Nov 26, 2018, 2:21 pm
Default Avatar

Adhesive the applied to the pre-fabricated materials

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Panupant Phapant  on 

Hi Please advise whether the adhesive applied to the pre-fabricated materials that is furnished offsite must meet the VOC requirement.

2
Profile picture for user jclifford3
Jon Clifford
LEED-AP BD+C
GREENSQUARE
LEEDuser Expert
261 thumbs up
Tue Oct 24, 2017, 2:12 am
Default Avatar

OATEY CLEAR PRIMER

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Judy Chin  on 

Do you know if the product is compliant with SCAQMD. On the MSDS, it states VOC Level:600 g/l per SCAQMD Test Method 316A. I thought the VOC allow was 510 or 550. thx

1
Tue May 8, 2012, 10:41 pm
Default Avatar

Duct Insulation Adhesive

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  R G  on 

Hi, we used a adhesive for duct insulation. I am trying to find the 'product type' for this Non-Flooring Adhesives & Sealants from the drop down menu options listed in leed online template.

1
Tue Sep 16, 2014, 10:46 pm
Default Avatar

Single possibly non-compliant adhesive

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Eric Thompson  on 

I'm working on a project in Norway and it is very difficult to get information from the contractor who is resistant to cooperation. It appears that one of the adhesive products is non-compliant, t

1
Tue Jun 11, 2013, 1:54 pm

Indoor Carpet Adhesives

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Colleen Ice  on 

Just curious I am working on IEQ 4.1 and IEQ 4.3. Both give you the option to add indoor carpet adhesives.

1
Sun Dec 18, 2011, 4:35 am
Default Avatar

Form (V06) product data samples

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Zachary Tetreault  on 

Does anyone know with the New Form (V06) do we no longer have to upload more than 20% of the product sheets?

1
Sat Aug 26, 2017, 10:32 pm
Default Avatar

Smoke & Acoustic Sealant

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Giancarlo Perossa  on 

Does anyone know what category Smoke & Acoustic Sealant would fall under? I didn't find it listed in SCAQMD Rule 1168 and the categories in the LEED manual are a bit generic.

1
Tue Jun 11, 2013, 1:55 pm
Default Avatar

Adhesive for acoustic insulation on ventilation instalation

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Andrzej Gutowski  on 

Doea anyone could advise what category of adhesive would be that? Would that be up to material used for acoustic insulation?

1
Mon Jun 26, 2017, 9:25 pm

OFF Site Application

CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Gayle Borst  on 

So without my knowing it, the contractor had laminate applied off site to some cabinets- our LEED Reviewer flagged the fact that we had left out contact adhesive but had included the laminate on ou

1
Sat Nov 24, 2012, 3:19 am