| Topic | Recent |
|---|---|
Treatment of District or Campus Thermal EnergyGeneral forumsposted by Scott DeGaro on Nov 30, 2010, 8:08 am
USGBC's website "Resources and Tools" doesn't state that it's recommended for LEED 2009 projects, but does say that it supersedes version 1.0. The actual document states that it's an update to... |
|
SSc4 Credit Clarification- Calculation of AVR & RCCTEBOM-2009 SSc4: Alternative Commuting Transportationposted by Sundararaj Subburaman on Nov 9, 2010, 4:17 am
We are working on the achievement of credit points under SSc4 under v2009. My project building is operating for 24 hours. There are two shifts of operation and one general shift (8:30 a.m to 5:30... Last reply: Tristan Roberts, Nov 29, 2010, 11:25 pm |
|
European Compliance IssuesCI-2009 IEQc4.4: Low-emitting materials - composite wood and agrifiber productsposted by Eszter Gulacsy on Nov 18, 2010, 12:12 pm
Has anybody had any experience working with european product information provided on formaldehyde? I have been provided with some test results that show 0.1mg/m2 of formaldehyde of a... Last reply: Tristan Roberts, Nov 29, 2010, 10:44 pm |
|
What if we don't useNC-2009 IEQc4.4: Low-emitting materials - composite wood and agrifiber productsposted by Armen Khachikyan on Apr 15, 2010, 2:20 am
What if we don't use composite... Last reply: Tristan Roberts, Nov 29, 2010, 10:37 pm |
|
Reclaimed White Oak for Materials ReuseCI-2009 MRc3.1: Materials Reuseposted by Alan Bernstein on Nov 29, 2010, 7:32 pm
I am using a reclaimed white oak... Last reply: Tristan Roberts, Nov 29, 2010, 9:38 pm |
|
IEQc1 and IEQc2NC-2009 IEQc1: Outdoor Air Delivery Monitoringposted by Carolina Vergnano on Oct 28, 2010, 7:52 am
If I comply with the IEQc1 using airflow measurement device that measures outdoor air intake flow with accuracy of plus or minus 15% of design minimum outdoor air rate, as defined by ASHRAE 62.1... Last reply: Scott DeGaro, Nov 26, 2010, 12:55 pm |
|
Mechanical floorsCI-2009 IEQc3.2: Construction IAQ management plan - before occupancyposted by Billy Ng on Nov 26, 2010, 10:29 am
I have a mechanical floor that is boxed in with no windows. this floor is just... Last reply: Scott DeGaro, Nov 26, 2010, 11:57 am |
|
Vending MachinesEBOM-2009 EAc5: Enhanced Refrigerant Managementposted by Laura Girard on Nov 16, 2010, 12:08 pm
We have a number of refrigerated vending machines on our facility that are not owned or operated by the building owner. We could not read any nameplates due to installation and safety concerns... Last reply: Dan Ackerstein, Nov 24, 2010, 4:03 pm |
|
Hi, My project is a CookiesEBOM-2009 EAc1: Optimize Energy Efficiency Performanceposted by Jose Salinas on Nov 24, 2010, 11:04 am
Hi, Last reply: Dan Ackerstein, Nov 24, 2010, 3:57 pm |
|
I have a problem with owners allowing the GC to name the CANC-2009 EAp1: Fundamental Commissioning of Building Energy Systemsposted by Alfredo Benavides on Sep 15, 2009, 12:28 am
Despite the owner's high level of confidence on his... Last reply: Lannie Farmer, LEED AP BD&C; QCxP, Nov 24, 2010, 2:01 pm |
