I am working on an international project that has novelty lighting and lighting that displays cafe food. Are either of these exempt from EAc1.1? Is there a resource that gives the gist of ASHRAE...

Hi all,

The requirements in the guidance state:
"Calculate the daylight illumination for each applicable space using the following daylight criterion: Clear sky conditions at both 9...

Does anybody know how to calculate borrowed light streaming into private cell offices formed by glazed partitions but programmed deep near the core within an open space?

In pursuit of this...

We are considering trellises with plants and/or vines on top to cover 50% of the parking. Although this is not quite vegetated green roof, it does put the parking under cover. What are your...

Applying values to "Refrigerant Impact Calculaton" chart, we have final impact per tone equal to 100 for each device. "average refrigerant impact per ton (must be less than or equal to 100)" is...

Does anyone have any suggestions as to the most effective way to distribute surveys to approximately 1000 office building tenants. There is one main lobby/elevator bank by the entrance....

Hi,

We are in the midst of our final submission and we have decided to submit for this credit.

The building just went online end of January. We have actual energy usage for past 4...

we will be preparing our ND project for Stage 2 certification in the course of the next few months and we have the LEED boundary pretty much staked out.

the developer has just announced...

I am a bit confused about the daylight simulation. We have carried out simulations for every occupied space in the building at 09:00 AM and 15:00 PM. We take the percentage of areas that are...

Does anyone have an excel template that they created to calculate the baseline vs. installed case? I've been working on it, but it is complicated. Email: ...