I am documenting an energy model for LEED 2009 EAp2/EAc1 and I would like to include a document that describes the modeling techniques used for each modeled system. The reason that we would like...

TODD REED Energy Program Specialist PA DMVA LEEDuser Expert 888 thumbs up January 24, 2012- 11:51 am The last addenda issued by USGBC changed the minimum requirement to 10fc. This is only noted in the addenda so Reference Guides will not show this. I assume the 25fc minimum you have seen in the forums and the threads were prior to this addenda. Log in or register to post comments ...

Hi, we are analyzing the feasibility of obtaining an...

Hi,

We´re working on a project that is pursuing IEQ P1 via natural ventilation. The 4% of ventilation surface required could be achieved using operable windows? Or it is mandatory the use...

In an academic library setting, has anyone had experience with how to count the workstations provided for library patrons? There will be a combination of tables and chairs as well as study...

Upon reading Reference Guide, it is my understanding that a private office can achieve this credit simply by having an a single light fixture and control within the space. Only when there are...

http://www.pefc.org/

PEFC is looking very similar to...

Have been having difficulty uploading documents for this credit. I called the 800 number and they said that they were having technical difficulties and to try again later. I then tried to set...

I am working on a LEED project and we hired an engineer to run an energy model on EQuest. He then submitted all the required forms and entered all of the information onto the associated form,...

Ramesh, I would recommend reading about this question in the information above under "Bird's Eye View" and below in other forum discussions. Log in or register to post comments Ron Frank...