Some commentors are stating that regarding SSc8, Reviewers are asking for vertical calculation points spaced 5' apart. The Reverence Guide specifically states 10'x10' grid spacing for the site...

We are working on a college dormitory and trying to calculate the daily uses for kitchen sinks. The only kitchen is on the first floor of the dorm and not in each dorm room. Since this is a...

In December of 2010 a LEED project that was certified as Gold was denied the Lighting Controls credit because task lighting was not provided at copy and fax machines.

The reviewer claimed...

Hi.
The credit language states that projects without cooling towers are ineligible for this credit. But if a project has cooling towers for the purpose of pre-cooling the refrigerant...

Do I need to work with the tenants and base our calculations on their interior fit-out design to evaluate whether we're meeting 75% of all regularly occupied spaces?

I found a contrasting information about how to count the interior structural wall.
In some document it is written that you have to count them for both sides and in some other document there...

Recently, IEQp2 for EBO+M projects are also requiring additional documentation that is not clearly requested in reference guide or on LEED Online. The issue is that most existing buildings...

Another issue with existing buildings is with previously existing permanently installed walk-off surfaces. This strategy (permanently installed) cannot be earned without manufacturer's...

We submitted an...

In another thread on this page, a LEED Reviewer mentioned being able to apply v2.2 "LEED Interpretations" to v2009 projects. That did not make sense to me. After digging around for a bit it...