While preparing clarifications to pending prerequisites/credits the team found a discrepancy in the "approved" PI Form 3. Can the team make the necessary changes to PI Form 3 to match...

Background: Our project is a NC renovation of a building that is connected to district energy systems.

Question: The credit requirements state that we must follow LEED's...

One of my project includes an indoor swimming pool at a Rehabilition Center. I do not know of any way to apply the water savings gained by the use of a more water efficient filter in lieu of the...

We have a project that has structural masonry walls, and interior steel studs. Appendix G requires 7.5 c.i. for our walls, so I have two questions:
1. Can the continuous insulation be...

It is not clear to me how to model the "minimum outdoor air ventilation rates". If we intend to obtain the increased ventilation credit IEQc2, with at least a 30% increase above 62.1-2007, do...

I am working in projects in Mexico and it has been a challenge to model heating when we have none.

Sometime when modeling heating comes out higher in the proposed design than in the...

Can EnergyPlus be used to simulate daylighting for this credit? From my understanding, the clear-sky daylight factors are calculated for sun positions in EnergyPlus. You can put a...

We are using IES VE to show compliance with EA P2 and IEQ C8.1. For EA P2 we combined spaces with similar schedules to zones, separated by orientation. Because we use just one model, the daylight...

Hi All,

For those who have meters in hard to reach vaults, I'm wondering if you've found equipment you like for taking remote readings on water meters?

Thanks,
Jenny

I have a project that is an office building with mixed retail on the first floor, including at least one restaurant. The restaurant hours will likely extend beyond the 11 pm time past which we...