I received this question in IEQp1: "The ventilation calculations indicate that the value of the flow rate of air projected under the condition tested (DS) was modeled as 100% level for each of th

Hi, We are working on a project with wall mounted FCUs.

I am working on a Brewery Campus expansion that includes a small local distribution building that is utilizing natural ventilation.

Hello, I am currently trying to calculated Ds for the cooling condition for a project I an working on.

Our project is a one floor (on the 30th) LEED-CI project gut renovation project.

Hi everyone, We have a residential project which has around 600 rooms naturally ventilated. I've prepared an excel sheet to demonstrate compliance with natural ventilation requirements.

Hi, my project has PAU to supply OA through VAVs to AHUs, which then supply air to office spaces. This PAU also supplies OA through CAVs to lift lobbies and FCUs recirculate the air there.

To meet the minimum requirements from section 4 to 7 of ASHRAE 62.1-2007, we must comply with section 5.4 "Ventilation System controls", and for this we should include controls that enable system t

This is a 70,000 sf Aeronautical Maintenance Workshop in Colombia with the following features: -The space is 6 meters height. -There are interior walls 5 meter height.

We are in the midst of certifying a Medical office core and shell building. Our scope includes the landscaping, parking lot, side walks, and building shell.