This was always an easier credit to get, particularly in CA. It is unfortunate it does not seem to be valid anymore.

This was always an easier credit to get, particularly in CA. It is unfortunate ot does not seem to be valid anymore.

There are some applications, such as LPG (liquid petroleum gas) or diesel-fueled systems in remote locations, where you need to utilize combustion devices (stationary engines, boilers, etc) that do

Rule 1111 (Amended July 8, 1983), NOx Emissions from Natural-Gas-Fired, FanType Central Furnaces limits system sizes to 65,000 Btu/h cooling and 175,000 Btu/h. Can projects that have systems large

Does it make any difference if a building is located in the area where level of NOx is permanently higher due to low stack emission caused by transport? 

This credit is EAc7 in LEED 2009 V3 - Healthcare. My project does not have any of the equipment listed on the form (below).

The emission limits for products of combustion usually use ppm. But the emissions are often measured in other units.

Our team found that Raypak manufactures boilers that comply with the credit requirements.

Happy November LEEDuser -  the LEED requirement for generators for this Pilot is that they meet the SCAQMD requirements.  The requirement also includes a monitoring system, though SCAQMD

This credit aligned with our project’s goals to provide an energy efficient building.