See all forum discussions about NC-2009 IEQc4.3
 Subscribe to new posts about NC-2009 IEQc4.3 Post a new question aboutNC-2009 IEQc4.3
See LEEDuser’s guidance on NC-2009 IEQc4.3»
FAQs about IEQc4.3 :

If I have no flooring products in the scope of my project, can I earn this credit?

How do I handle a polished concrete floor?

Should mineral-based finish flooring products (without any integral organic-based coatings and sealants) and unfinished/untreated solid wood flooring be documented on the IEQc4.3 LEED Online form, even though they are exempt from certification requirement

On a renovation, should flooring that is previously installed be subject to the credit requirements?

One flooring adhesive we are using falls under both IEQc4.1 and IEQc4.3, and is over the VOC limit. We are using the VOC budget method to meet IEQc4.1 requirements, but are we automatically disqualifed from IEQc4.3?

The credit requirements are allowed to exempt unfinished wood flooring from the credit requirements, but wood flooring is almost always finished. This is confusing!

I have an international project and my flooring products aren’t tested using any of the above standards. How can I tell if they still comply?

View answers »

Forum discussion

NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems

conductive rubber flooring

Profile picture for user Lyle Axelarris
Lyle Axelarris
Building Enclosure Consultant
BPL Enclosure
LEEDuser Basic Member
58 thumbs up

In the past, we've used FloorScore-certified Static Dissipative rubber Tiling for Comm rooms. The client is now asking for conductive rubber flooring instead of dissipative. The proposed flooring (Statguard) is not FloorScore certified, and I can't find a conductive rubber tile that is FloorScore-certified. Has anyone had any luck with conductive rubber tile that meets IEQc4.3?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user tristanroberts
Tristan Roberts
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up

Mon, 11/30/2015 - 23:53

Sorry, I'm stumped... if you find, Lyle, anything please post back here.
Profile picture for user Lyle Axelarris
Lyle Axelarris
Building Enclosure Consultant
BPL Enclosure
LEEDuser Basic Member
58 thumbs up

Sat, 12/05/2015 - 03:44

Hi Tristan. Client ended up going with a conductive Vinyl flooring instead of rubber. Flexco ESD Static Control Vinyl Floor Tiles are FloorScore Certified.
Profile picture for user skippyjones
Deborah Lucking
Director of Sustainability
Fentress Architects
LEEDuser Expert
224 thumbs up

Fri, 04/15/2016 - 01:01

Lyle, what kind of adhesive did you use for the vinyl floor? A VCT adhesive, or a rubber flooring adhesive? The SCAQMD limits are different for each (50 g/L vs 60 g/L), and we are trying to determine which is correct. thanks!
Profile picture for user Lyle Axelarris
Lyle Axelarris
Building Enclosure Consultant
BPL Enclosure
LEEDuser Basic Member
58 thumbs up

Fri, 04/15/2016 - 01:31

Flexco 66/67 Solvent-Free ESD Epoxy Adhesive. 14.3 g/L VOC, CRI Green Label Plus, CHPS Compliant.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.