Below the paragraph,add the following section:Units of Measurement GuidanceIn order to facilitate certification review by U.S.-based reviewers, it is necessary to submit pertinent aspects of review-related documentation in English and convert units to U.S. Standard (i.e. Imperial) units of measure, unless noted otherwise in the credit or prerequisite description. It is not necessary to translate every aspect of every construction document into English and imperial units, but only those necessary for evaluation of LEED criteria.

At the end of the paragraph, insert the text "The GS-11 VOC limits applicable for this credit are summarized in Table 1. IEQc4.2 Applicable VOC Limits. "

Change figure title to "Figure 4. Unobstructed View through Window over Low Partition."

Replace 95% with 80% and remove "trips equivalent to an average vehicle ridership (as defined by SCAQMD) of 20"

In alphabetical order, add the term "An appurtenance is any built-in, nonstructural portion of a roof system, such as skylights, ventilators, mechanical equipment, partitions, and solar energy panels."

Replace the term "photovoltaic panels" with "solar energy panels" and add "other appurtenances" to the list of things deducted from the roof area so that the sentence reads "Projects may earn an Innovation in Operations (IO) credit for exemplary performance by demonstrating that 95% of the project\'s roof area (excluding any mechanical equipment, solar energy panels, skylights, and other appurtenances) consists of a vegetated roof system."

Add "skylights" to the list of things deducted from the roof area so that the sentence reads, "Determine the area of the roof covered by mechanical equipment, solar energy panels, skylights, and other appurtenances, and deduct these areas from the total roof surface area."

In alphabetical order, add the term, "Roof area is the area of the uppermost surface of the building which covers enclosed Gross Floor Area, as measured when projected onto a flat, horizontal surface (i.e. as seen in Roof Plan view). \'Roofs\', or portions of roofs, covering unenclosed areas (e.g. roofs over porches and open covered parking structures) are not included in the areas used to evaluate compliance with SSc7.2, though they may be applicable to SSc7.1."

In alphabetical order, add the term, "Roof area is the area of the uppermost surface of the building which covers enclosed Gross Floor Area, as measured when projected onto a flat, horizontal surface (i.e. as seen in Roof Plan view). \'Roofs\', or portions of roofs, covering unenclosed areas (e.g. roofs over porches and open covered parking structures) are not included in the areas used to evaluate compliance with SSc7.2, though they may be applicable to SSc7.1."

In alphabetical order, add the term, "Roof area is the area of the uppermost surface of the building which covers enclosed Gross Floor Area, as measured when projected onto a flat, horizontal surface (i.e. as seen in Roof Plan view). \'Roofs\', or portions of roofs, covering unenclosed areas (e.g. roofs over porches and open covered parking structures) are not included in the areas used to evaluate compliance with SSc7.2, though they may be applicable to SSc7.1."