100002541

Revise second and third paragraph under Behind the Intent to read as:
"These include small-scale renewables such as rooftop photovoltaics (PV), large-scale such as grid-connected wind farms or Green-e’ or equivalent certified EACs. Green-e’ is a trademark of the Center for Resource Solutions, registered in the U.S. and other countries.

100002291

Under Further Explanation, delete the paragraph titled "Surveying Visitors"

Add the following to Changes from LEED v4:
"Visitors are encouraged, but not required to be surveyed."

100002524

Further Explanation

1. Beneath the "Calculations" section, add a new section "Total Site Energy Use" with the following content:

"Total Site Energy Use
Projects complying with EA prerequisite Minimum Energy Performance through the Normative Appendix G Performance Rating Method should use the modeled total site energy value for credit calculations.

100002531

In the third bullet under International Tips, replace "EN 717" with "European Decopaint Directive and TRGS 610"

Add "(for composite wood)" at the end of the fifth bullet.

Add two sub-bullets under fifth bullet:
- Indoor Air Comfort
- Indoor Air Comfort Gold

100002523

Revise the last paragraph of requirements to the following: "Occupants must have direct access to the view and be within three times the head height of the glazing. "

100002535

Revise the second bullet under Beta Update to read as: "The cost-based threshold for Option 2 has been removed to simplify credit achievement.

Revise the first sentence in the second paragraph under Step by Step Guidance to read as "Option 2 Material ingredient optimization requires the selection of at least 5 products to meet at least one of the paths listed in the credit requirement."

100002536

Under Step 2. Select Watersense-Labeled Products:
Delete "or showers" from the sentence "Newly installed aerators or flow restrictors added to private lavatories or showers must be WaterSense labeled.”

100002534

Under Step by Step Guidance and the second bullet under Required Documentation, change "20% "to "15%" and "40%" to "30%"

Under Exemplary Performance, change "60%" to "45%"