Ecotect Daylight Autonomy and Insolation levels Analysis

Hello, I'm trying to answer the V4 BD+C (New Construction and Major Renovation) daylight credit through option 1 (SDA+ASE). There is an option in Ecotect 2011 called Daylight Autonomy that allows the analyse for the entire year starting at 8 until 18h and with a required lighting level in default mode of 300 lux. Is this valid to fulfil the credit requisites? Seems made for it. This is the Ecotect report that I would send with the analysis grid (more than 75% SDA) Report: Grid Analysis Description: Percentage of nodes by contour band. Daylight Automomy (300 Lux) Contour Band Within Above (from-to) Pts (%) Pts (%) 75-80 19 0.49 3833 98.51 80-85 22 0.57 3814 98.02 85-90 52 1.34 3792 97.46 90-95 147 3.78 3740 96.12 95-100 3543 91.06 3593 92.34 About the ASE, a peak radiation calculation for the entire year from 8 to 18h with a scale from 0 to 1000 Wh (both the SDA and ASE with a 600mm square grid at a 76 mm height) generating an analysis over the grid and a report like the following is acceptable to fulfil the credit? Report: Grid Analysis Piso 0 Description: Percentage of nodes by contour band. Peak Radiation Contour Band Within Above (from-to) Pts (%) Pts (%) 0-50 0 0.00 3745 100.00 50-100 1228 32.79 3745 100.00 100-150 348 9.29 2517 67.21 150-200 388 10.36 2169 57.92 200-250 112 2.99 1781 47.56 250-300 98 2.62 1669 44.57 300-350 243 6.49 1571 41.95 350-400 83 2.22 1328 35.46 400-450 168 4.49 1245 33.24 450-500 290 7.74 1077 28.76 500-550 46 1.23 787 21.01 550-600 99 2.64 741 19.79 600-650 170 4.54 642 17.14 650-700 76 2.03 472 12.60 700-750 112 2.99 396 10.57 750-800 41 1.09 284 7.58 800-850 187 4.99 243 6.49 850-900 19 0.51 56 1.50 900-950 18 0.48 37 0.99 950-1000 19 0.51 19 0.51 1000-1050 0 0.00 0 0.00 1050-1100 0 0.00 0 0.00 1100-1150 0 0.00 0 0.00 1150-1200 0 0.00 0 0.00