Our university building undergoes it's construction stage.
After reading all above we have curtain doubts about further procedure on certification.
There are 2 main wings (refer to the link for orientation http://www.venesco.com.tr/#!suleymansahuni/cptl).
Each main wing divided into 5 departments. A1, B1...E1 belongs to the 1st wing, while A2, B2...E2 to the second one. Those 2 main wings are connected with 5 bridging blocks.
Issue:
4 blocks ( D1, D2, E1, E2) are still incomplete. Remaining complete blocks are occupied and separated with partition walls.
Is it possible to certify if we assume that those blocks would be completed in the future?
Thanks in advance
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11478 thumbs up
December 8, 2014 - 1:02 pm
Orçun, when will the remaining blocks be completed?I would either wait and certify the entire building as a whole when it is built, including the remaining blocks, or certify the building up to a certain point and stop there. In that case I am not sure if you certify the remaining blocks later or not at all, but I would need to hear more about the timeline and the relation betwene the blocks to know for sure.
Orçun Özhelvaci
LEED CoordinatorLimak Construction Company
December 9, 2014 - 3:16 am
Hi Tristan,
Thank you for your quick response.
"...or certify the building up to a certain point and stop there..." in other words its possible to certify only completed part of the building?
Its not clear yet when other blocks will be completed. Those blocks connected with atrium with corridors.
We have isolated incomplete parts of the building with the wall so that its divided and sealed.
Again another issue: mechanical system (HVAC and heating) designed to meet whole building's demand.
Will it be possible to certify half building and omit second half as addition maybe? Hope we made us clear. If you need further clarifications we would be glad to provide all necessary information.
Regards
Orçun Özhelvaci
LEED CoordinatorLimak Construction Company
December 11, 2014 - 2:20 am
Dear Tristan,
Dear All;
Could you please share your experiences and opinion about mentioned issue in that field.
Will be looking forward to have your feedback.
Thanks a lot