Dear all,
I have a custom shaped (curved) marble flooring, the marble is mineral based, but the supplier will be cutting the marble shapes at his factory, and will be adhering curved parts to each other, to supply square panels on-site.
the on-site panels will be sealed using 30 g/L voc epoxy, which is compliant with SCAQMD, but what about the flooring itself, should I force the supplier to use the same epoxy that I'am using on-site, or he must use mineral based (organic free) adhesive to guarantee supplying me with "mineral based flooring"?
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11478 thumbs up
July 26, 2014 - 7:33 am
Omar, I don't know if I totally understand your question but the supplier should use a compliant epoxy product.
Omar Elrawy
Green Building Consultant | ResearcherGreenA Consultants
56 thumbs up
September 23, 2014 - 8:55 am
Tristan, thanks for your reply. I'am asking about the adhesive that the supplier will be using in his factory. Should it be 100% mineral based so that I can report that I'am using mineral based flooring, or it must only comply with the SCAQMD requirements knowing that It is applied off-site?