Forum quick links
Bus Terminal
Schools-NC-v4 LTc5:Access to quality transitposted by Marlene Borruso on
Would a bus terminal, which serves both rapid transit buses and public buses be required to be within 1/4" mile or 1/2" mile walking distance from the project entry?
IEQp1-tenant spaces
CS-2009 IEQp1:Minimum IAQ Performanceposted by Agnieszka Rylska on
We are working on a shopping mall project in whcih there will be many retail spaces. Some of the tenants will design their own ventilation systems and provide their own AHUs.
Exterior doors in meeting rooms
NC-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Jeannie Rueter on
The conference center I'm working on has several small meeting rooms that have interior and exterior doors with the exterior doors leading to open public terraces.
Walk-off Mat Width Requirement
CI-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Itzel Meynard on
My project is LEED 2009 commercial interiors. I understand the entryways are required to be 10 feet in the direction of travel inside the building.
Min Chiller Efficiency
CS-2009 EAc1:Optimize Energy Performanceposted by Ciaran McCabe on
I am trying to establish the minimum chillier efficiency we are permitted to use in our PRM model. We have spec'd an air cooled chiller.
Total Water Use Calculator
Homes-v4 WEc1:Total water useposted by Phil Vetterkind on
Is there a off line calculator for "Total Water Use" yet?
ACP using v4 language
CI-2009 EAc3:Measurement and Verificationposted by Brightworks Sustainability on
LI #10418 allows LEED-NC v2009 projects to meeting the M&V credit by meeting LEED v4 enhanced commissioning, monitoring-based commissioning, and the advanced energy metering credit.
Parking ventilation/exhaust
NC-2009 IEQp1:Minimum IAQ Performanceposted by Charalampos Giannikopoulos on
As per ASHRAE 62.1 parking areas are subject to requirements for exhaust air and not ventilation rates. Accordingly, parking areas are not included in IEQp1, are they? Thanks in advance!
Exceptional calculation for process load
NC-2009 EAp2:Minimum Energy Performanceposted by Charalampos Giannikopoulos on
What would be the process of an exceptional calculation to prove reduction in process office equipment density for an office building?
Thermal Comfort - ACP for Projects in India
NC-2009 IEQc7.1:Thermal Comfort—Designposted by Gopinath Vasu on
Dear All, Kindly clarify the following query regarding Thermal Comfort Design Alternative Compliance Path for projects in India. In ACP it is said that projects shall meet the desired comfort con