Hi every one, I have a general question regards definition of " Material Value" .ie, my structure steel value in the manufacture is 200K and the cost I paid to my sub after fabrication ...

Hi everybody, The project is a garment factory. We are modeling a 100% outdoor air IEC system for the proposed case. And the system 8 (VAV with PFP Boxes) is modeled in the baseline case.

Hi everybody, The project is a garment factory. We are modeling a 100% outdoor air IEC system for the proposed case. And the system 8 (VAV with PFP Boxes) is modeled in the baseline case.

Good morning, We have a wood stair (wooden steps covered with another wood species) that is manufactured by the millwork contractor. The scale is a custom made design.

The actual points won't be achievable for a few months, but USGBC has released implmentation guidance. Please see the details here:

Hi, a Conference Center seeking recertification under EBOM v2009 has an installed PV system that seems to have all the requirements of the pilot credit: - the building doesn't use any of the ener

We have a facility that will provide a gym, art classes, weight area, aerobics, etc. It its mostly health activities related facility.

I'm working on a community center that pretty much works as a facility.

I have a facility that will be LEED NCv2009 certified and is part existing and partly new.

I am confused by this credit. Can non-inpatient areas that fall outside the 15' perimeter be excluded?