Forum quick links
Public Comments Until 11/13
NC-2009 EAp2:Minimum Energy Performanceposted by Glen Phillips on
USGBC released proposed updates to EAp2/EAc1 for LEED 2009, which at its most basic, requires a minimum 4 points under EAc1.
CO2 sensors that run by battery
NC-2009 IEQc1:Outdoor Air Delivery Monitoringposted by Stella Stella on
Does CO2 sensors that run by battery or powered by PC (USB port) count towards this credit for compliance? Please let me know.
Definition of street frontage
Pilot-Credits PC14:Walkable Streetsposted by Florian Schmidtchen on
What is the right definition of street frontage?
Rehabilitation of a historic building
NC-2009 PIf1:Minimum Program Requirementsposted by Veronica Reed on
Hello we are working on a rehabilitation project for a small hotel being developed in an existing historic building in Quito, Ecuador.
Amphitheater Occupancy for SS and WE
posted by Peter Doo on
Amphitheater Occupancy Project Location: United States Our project is the back stage area of a seasonal outdoor amphitheater concert venue.
Accounting for Shower Use by non-building occupants
EBOM-2009 WEp1:Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Deborah Lucking on
We have a campus project where FTEs from a number of buildings have access to showers and lockers in a separate "clubhouse" building.
Accounting for shower use by non-occupants
NC-2009 WEp1:Water Use Reduction—20% Reductionposted by Deborah Lucking on
Ours is a campus project where FTEs from a number of buildings have access to showers and lockers in a separate "clubhouse" building.
Solar Tubes in Energy Pro
NC-2009 EAp2:Minimum Energy Performanceposted by Logan Dorrell on
How would we model a solar tube light fixture in Energy Pro Software? We want to get the light thru it, but not the heat.
How does GBCI ccalculate reclaimed water reduction?
NC-2009 WEc2:Innovative Wastewater Technologiesposted by David Gibney on
This is an academic problem that I need confirmation for. It’s a LEED-NC 2009 project. • 242 FTEs. No visitors, etc. 50:50 gender ratio = 121 of each.
IEQ 4.6
Schools-2009 IEQc4.6:Low-Emitting Materials—Ceiling and Wall Systemsposted by Stephanie Santiago on
Where would joint compound be categorized? I don't believe it needs to be in the low emitting adhesives and sealants category but I could be wrong. I am currently classifying it under IEQ4.6.