Reference calculation is based on 'sqft of the building' . Does the sqft of the building will have to include the parking area also(example basement parking)

Can a golf course be used as a park in SS C2 Community Connectivity?

Can the athletic fields, tennis courts etc at a local high school be considered a park under CI V3 SS C2 - Community Connectivity?

I have received a review comment on MRpr1 that indicates that I only addressed "a portion" of the credit requirements for MRc1, 2 and 3 and need to address the full credit. I am confused.

This credit talks about a purchasing plan but uses an inventory in lieu in the documentation.

EAp2 was denied in our final design review. We are going to appeal this by addressing their comments and getting the energy savings above 10%. My question is, IF the appeal is denied, what then?

We have a new building but with existing central plant that serves also another building. My question is do i have to model part of existing central or whole.

I'm working on a semiconductor fab that is part of a LEED campus project. The campus has a well-established, campus-wide green cleaning program in place.

I have two turf areas that will not be irrigated after establishment My understanding is that for the water sense calculator you must model them with irrigation is they are landscaped Is this true

Hi, my project is a mix use building with two buildings connected via a commercial area below, a residential and hotel in one block and a office tower in the other.