I am also an independent LEED consultant that is considering having to change my membership from regular to Silver because I have some large projects coming up that will have a substantial noticeab

Is irrigation system considered as a division 15-mechanical ? Our project spec places this system in division 2-landscape. This will impact the material-cost calculation for MR credit.

I have about sixty-five split systems in two apartment buildings using R-410a. The factor that is keeping me from meeting this credit's requirements seems to be Rc (lb/ton).

Is there any list of programs which can be used to demonstrate compliance with IEQ Cre 2 Option 2. Do you know if DesignBuilder can be used to show appropriate airflow rates?

I am doing the calculations for the "daylight factor method" for Daylight and Views credit. It is an office floorplate that is roughly 150'x150' with an inner core.

Hello everyone, New to LEED, and I have been trying to figure out who determines what is native and what is adaptive? Need to put a list together for the project that I am working on.

Total lighting load for project space under EAc1.2 would be the same as connected lighting load under EAp2?

Total lighting load for project space under EAc1.2 would be the same as connected lighting load under EAp2?

hi there, here's what will probably be an easy question for you but is stumping me, as this is my first time documenting this credit.

We've conducted the differential pressure test and the average is around 7 pa. We've had the contractor test the room and report the results on the LEEDUser form.