What MET rate would you assume for the ASHRAE-55 compliance for retail areas (ie. supermarket, clothes retail)?

Hi! I'm finishing a project and must indicate the levels to be configured in ppm CO2 sensor environments. As an example, I have a training room with 8 people and an area of ​​497.29 sf.

I’m working on a facility that has several concession areas that are enclosed with a solid roll up door that are open to the outside when occupied. The space is occupied only during event.

For materials that were removed during demo and then re-used during construction, can you count these materials as salvaged as well as regional, meaning can you count the cost twice?

Courtney, we have a similar situation to yours in that we do not have access to whole building utility data. We are currently in the process of certifying several large multi-family projects under

Hi, If an AHU (initially outside of the scope of work) had to be modified in order to comply with the ventilation requirements of Standard 62.1-2007, does it have to comply with the requirements

what is the definition of a non-LEED-certifiable building? does it mean your not going to attempt to certify them or that they dont qualify/meet minimum requirements?

Same question, but I assume fly ash used in concrete is considered recycled content?

Question: I have new LEED-NC project for a building on a college campus.

Our project is located within 1/2 mile radius of more than 10 basic services. There is pedestrian access between the building and the services.