Dear all: There is an administrative wing of an industrial facility and my questions are: 1.

I wonder if I need to include demolition debris if a former building at the project site was demolished for four years ago?

Hi, I am working on a building located in a development in a business park with 4 buildings.

IEQ 4, Group 5 references both 1168 and the ARB SCM. However, not all references are equal. 1168 identifies non-Flats as 50 g/L and the SCM identifies non-Flats as 100 g/L.

I'm working on a science building on a prep school campus with a lot of lab space. It was entered as a school into Target Finder, but obviously compares poorly to regular school buildings.

In a situtation where the buidling is nearly to the lot lines in all four directions and the zoning requires 37 parking spaces, we would need to provide 2 LE/FE stalls under option 1.

In the case of a building that is nearly built to lot lines in all directions except the alley, can the secure bike racks be located on the alley side of the building and meet this credit requireme

I have read that fire sprinkler systems are not addressed in LEED rating systems - does this also mean that a thread sealing paste used on the sprinkler piping does not need to comply to VOC limits

I would just like to confirm the points applicable for GIBc2.

I've been looking for info on completing this table to no avail, so hopefully somebody out there can help. I'm working on a 4 story office building with future retail on the ground floor.