Forum quick links
MPR2 LEEDuser Forum questions and comments prior to the 09/05/17 upgrade
NC-2009 MPR2:Must be a complete, permanent building or spaceposted by Brian Bartholomew on
Did we lose access to all the MPR2 LEEDuser Forum questions and comments posted prior to the 09/05/17 upgrade?
University Participation in Utility Solar
NC-v4 EAc7:Green power and carbon offsetsposted by Rebecca Aarons-Sydnor on
We are working on a new building at a University that has an existing agreement with the utility to offset 96% of the energy used with utlity-owned solar farms, and all RECs are retired on the Univ
Electrification baseline in LEED (and James leading today's call)
posted by Nadav Malin on
Hi folks,
On today's call James Peterson will be introducing a conversation about how COVID might have changed our ways of working.
EU Special Area of Conservation - ACP?
NC-2009 SSc5.1:Site Development—Protect or Restore Habitatposted by Devyn Olson Sawyer on
Our project is located in the west of Ireland. The project is a warehouse extension (a single LEED project) on an existing commercial campus, and the entire campus is the same owner/occupier.
LI 10102 - Letter of Commitment - Register incomplete space separately?
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Deb Favaretto on
Hi,
Low-Emitting Materials Calculator - Category Quantifying Option(s)
NC-v4.1 EQc2:Low-Emitting Materialsposted by Catherine Blakemore on
For each Category do all product need to be quantified the same way way....meaning if Volume or Surface Area are an option, do all products need to be quantified by volume for example or can both v
PM2.5
NC-v4.1 EQc4:Indoor Air Quality Assessmentposted by Sharon Bessa on
Taking measurements in a building located in a city that is considered to be in attainment for PM2.5.
ASHRAE 55, patient rooms, and metabolic rates
Healthcare-v4 EQc5:Thermal comfortposted by Jim Nicolow on
Our HVAC engineer indicated that ASHRAE 55 cannot be met on a healthcare project because it is not applicable for metabolic rates below 1.0. Isolation room and ICU patients could be sleeping