Rick Servoss
Mechanical Engineer
LEEDuser Basic Member
23 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
Calculating Vot in Credit Template
CI-2009 IEQp1:Minimum IAQ Performanceposted by Rick Servoss on
The Template calculates Vot by dividing Voz by Ev. ASHRAE 62.1 2007 arrives at Vot by dividing Vou by Ev, not Voz.
2
Fri Dec 21, 2012, 6:54 pm
M&V Plan - Specific Acceptable Range(s) of Error
CS-2009 EAc5.1:Measurement and Verification—Base Buildingposted by Marina Andrade on
Hello, I just got the review comment requesting the “specific acceptable range(s) of error”, follow the comment bellow. “TECHNICAL ADVICE: Please revise the Measurement and Verification Plan, as
2
Principal
G. F. Shymko & Associates Inc.
LEEDuser Basic Member
97 thumbs up
Fri Dec 21, 2012, 11:40 am
Design and Build Contract
LEED Reviews: Appeals, Design/Construction Submittals, and more
posted by Ameet AA on
I am working on multiple building campus level projects which fall under same contract and same owner.
10
Senior Sustainable Design Consultant
Arup
LEEDuser Basic Member
2 thumbs up
Fri Dec 21, 2012, 11:02 am
Audits Around the World
EBOM-2009 EAc2.1:Existing Building Commissioning—Investigation and Analysisposted by Jenny Carney on
All, I'm trying to compile a list of energy audit providers outside of the US.
4
Owner / Energy Engineer / Sustainability Consultant
Sustainnovations, LLC
LEEDuser Basic Member
94 thumbs up
Fri Dec 21, 2012, 12:08 am
5
LEEDuser Basic Member
23 thumbs up
Thu Dec 20, 2012, 11:14 pm
Air cooled chillers and other air cooled equipment.
NC-2009 EAp2:Minimum Energy Performanceposted by Rudolph Carneiro on
Question: If I have an air cooled chiller selected at non-ARI conditions that has a full load efficiency of 3.0 COP, does it comply with the minimum efficiency requirement of 2.8 COP from ASHRAE -
3
LEEDuser Basic Member
0 thumbs up
Thu Dec 20, 2012, 9:01 pm
6
Senior ESD Consultant
LEEDuser Basic Member
62 thumbs up
Thu Dec 20, 2012, 8:53 pm
Innovation points no longer recognized?
NC-2009 IDc1:Innovation in Designposted by Kris Phillips on
I have conflicting information on a few Innovation points that have been achieved on certain projects, but are apparently being denied on current projects being deemed "too easy" by the GBCI review
5
Sustainable Building Services Project Manager
Architectural Energy Corporation
LEEDuser Basic Member
6 thumbs up
Thu Dec 20, 2012, 4:58 pm
Cooling and heating specification
NC-2009 EAc1:Optimize Energy Performanceposted by Jatuwat Varodompun on
If my project does not have any heating system at all (but it will have cooling system), Are the baseline and proposed models required to have defualt heating system as specified in appendix G?
2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Dec 20, 2012, 3:03 pm
Evaporative Coolers and ASHRAE Mandatory Requirements 6.4.3.4
NC-2009 EAc1:Optimize Energy Performanceposted by Jorge Torres-Coto on
If I have a space (manufacturing warehouse) that is served by Evaporative Coolers only. Do the Mandatory Requirements of ASHRAE 90.1 section 6.4.3.4.2 & 6.4.3.4.3 apply?
2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Wed Dec 19, 2012, 11:08 pm