Topic | Recent |
---|---|
Lighting controls inside a dorm restroomNC-v4 EAp2: Minimum Energy Performanceposted by Waleed AlGhamdi on Sep 22, 2020, 11:26 am
Section 9.4.1.2 Space Control indicates that restrooms must have an occupancy sensor. We have a dorm project where each two dormrooms has a shared bathroom. My understanding is that since the... |
|
EN 50600 standard for Data CentersData-Centers-NC-v4 EAp2: Minimum Energy Performanceposted by Diego Casado on Sep 23, 2020, 10:01 am
We are trying to figure if there are alternative compliance paths using Data Center specific standards. Has anyone considered/used the European Standard EN 50600 to document energy... |
|
How to calculate the occupancy in healthcare Buildings for CO2 SensorCalculating FTEsposted by shankar uppula on Sep 23, 2020, 10:32 am
We have a requirement in Hospital Job, to calculate the CO2 sensor in areas as per leed 1000SQFT, But how to calculate the... |
|
Innovation and Pilot credit clarification on Cleaning PolicyRetail-CI-v4 INc1: Innovationposted by Toshif Ruikar on Sep 24, 2020, 7:57 am
Hi, Can I use green cleaning policy as a innovation in one of our LEED ID+C retail project, as i am already applying for Pilot-Credits INpc137: Safety First: Cleaning and Disinfecting... |
|
Dwelling units monitoringNC-v4.1 EQp1: Minimum indoor air quality performanceposted by Nicolas Martinez Ochoa on Sep 24, 2020, 10:20 am
Hello everyone, I’m working in a multifamily project which uses natural ventilation for both conditioning and ventilation. My question is regarding indoor air quality monitoring. The... |
|
Number of Commissioning AgentsLEED Canada Forumposted by Dola Onajin on Sep 24, 2020, 11:25 am
Is it okay to have more than one independent... |
|
Dimensional Lumber- categoryNC-v4 EQc2: Low-emitting materialsposted by Chyanne Husar on Sep 25, 2020, 8:33 am
Does dimensionable lumber used for blocking or support for interior wall partitions considered part of materials to be evaluated for LEM compliance? If so, would it general go under the wall... |
|
VOC content evaluation- category definitions and limits vary across the regulations listedNC-v4.1 EQc2: Low-emitting materialsposted by Sagar Raghuwanshi on Sep 28, 2020, 10:21 am
LEED v4.1 says that "Product meets the... |
|
Minisplit EfficiencyNC-2009 EAp2: Minimum Energy Performanceposted by Paula Hernandez on Sep 28, 2020, 1:58 pm
Hi I am certifiying an office building, a very small one, attached to a wharehouse. The office building counts with minisplit systmes, but I cannot find in the market minisplits... |
|
Extraction distance to factory and distance from factory to construction site.NC-2009 MRc5: Regional Materialsposted by cedric grenier on Sep 29, 2020, 9:51 am
Hi, I'm having a little bit of trouble understanding exactly what distance they're asking for. It may sound like a bad question but it's an itch I need to scratch. So we call steel from a... |