Log in
Forum
Topic

The overlap activities between CxA and CM Consultant

NC-2009 EAp1: Fundamental Commissioning of Building Energy Systems
posted by Panupant Phapant on Mar 4, 2015, 10:06 am

Hi
Can anyone share the...

Last reply: Scott Bowman, Aug 29, 2016, 6:38 pm

Atrium entrances

NC-2009 EAp2: Minimum Energy Performance
posted by Chilufya Lombe on Mar 5, 2015, 5:21 am

Hi, we have a large, naturally ventilated atrium in the middle of our building. All entrances to the building are via this enclosed atrium. My understanding is that the vestibule requirement is...

Last reply: Marcus Sheffer, May 29, 2015, 10:25 am

Eligibility for LEED- existing building structure

LEED Rating System Selection
posted by Agnieszka Rylska on Mar 6, 2015, 4:58 am

It would be benificial to all if you could post the USGBC response on this forum. Good Luck! Log in or register to post comments Melissa Merryweather Director Green Consult-Asia LEEDuser Basic Member 245...

Last reply: Melissa Merryweather, Mar 6, 2015, 9:09 pm

Do we include Non-certifiable structure in Building gross area?

NC-2009 MPR7: Must comply with a minimum building area to site area ratio
posted by Anya Fiechtl on Mar 27, 2015, 12:41 pm

modelers to determine what counts. Also check out the modeling masters in the EAp2 LEEDuser forum, http://www.leeduser.com/credit/NC-2009/EAp2. In LEEDonline, you will enter area data for both the building...

Last reply: Jon Clifford, Aug 4, 2015, 10:31 pm

What is included in MR Credit 7

EBOM-2009 MRc7: Solid waste management - ongoing consumables
posted by cathy keagle on Mar 30, 2015, 1:56 pm

In our latest review we were told that landscape waste is not to be included in the calculations for this credit. This appears to be inconsistent with your opening guidelines. Also is it your...

Last reply: Trista Brown, May 7, 2015, 5:14 pm

MR 5 Regional Materials

NC-2009 MRc5: Regional Materials
posted by Derek Darby on Apr 6, 2015, 7:49 am

a screen shot in this forum). Is each option (1 and 2) worth 1 point? Log in or register to post comments Nadav Malin CEO BuildingGreen, Inc. LEEDuser Moderator 844 thumbs up August 20, 2015- 4:12 pm Yes, LEED-CI 2009 does work as you described. There is a separate forum on LEEDuser for talking about that rating system and credit, so you might want to take your questions about that over there:...

Last reply: Nadav Malin, Aug 20, 2015, 4:12 pm

Patient rooms showers/lavs/water closet at Rehab Center?

NC-2009 WEp1: Water Use Reduction
posted by Saju Varghese on Apr 16, 2015, 3:09 pm

I was wondering if fixtures at patient rooms can be classified as residential or private? given that it is a public institution, I'm guessing it would gear more towards "private" but this would...

Last reply: Michelle Robinson Schwarting, Apr 17, 2015, 4:12 pm

Anti-Rust vs flat primer

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Michelle Raigosa on Apr 21, 2015, 12:29 pm

Does anyone have any insight/thoughts/comments/experience about categorizing an anti-rust coating as compared to categorizing the product as a flat coating/primer? If the...

Last reply: Jon Clifford, Sep 7, 2016, 4:05 pm

G3.1.2.8 Design airflow rates

CS-2009 EAp2: Minimum Energy Performance
posted by Agnieszka Rylska on May 6, 2015, 5:18 am

I have a question regarding section G3.1.2.8 of Appendix G. This section says that "design supply airflow rates for the baseline building design shall be based on a supply-air-to-room-air...

Last reply: Marcus Sheffer, Jun 11, 2015, 9:37 am

Fuel types of process energy

NC-2009 EAp2: Minimum Energy Performance
posted by Jatuwat Varodompun on May 8, 2015, 11:38 am

We have a new plant using NGV as a fuel to fry potato chip in Thailand. The exact similar technology was used in another plant in China (same potato chip brand) which is already LEED gold...

Last reply: Jatuwat Varodompun, May 8, 2015, 9:23 pm