| Topic | Recent |
|---|---|
R-4 pipe insulationHomes-v2008 EAc7: Water heatingposted by Phil Vanderloo on Jan 26, 2017, 7:14 pm
Does anyone have a recommendation for pipe insulation that meets LEED V4 criteria? Min R-4, 1/2" wall thickness |
|
IEQp1 link to IEQc2 problemNC-2009 IEQc2: Increased Ventilationposted by Manuel Martin Delgado on Jan 30, 2017, 3:55 am
After filling the sample form IEQp1 table IEQp1-4 and press calculate I get a Y (yes) in both compliance with IEQ prerequisite 1 and credit 2. However, the cell below which links to IEQc2 sample... |
|
LEED Lab MexicoPilot-Credits IPpc96: LEED Labposted by David Dominguez on Feb 8, 2017, 4:55 am
We are wrapping up our second semester and finishing our performance period, we expect soon to have the first building in Mexico certified under a LEED-Lab. We are so happy and we would like to... |
|
Flush out by AHU volume or Floor volume?NC-2009 IEQc3.2: Construction IAQ management plan - before occupancyposted by Aru Sau on Feb 16, 2017, 9:37 am
In this project, there are three floors ( with multiple rooms with interior walls with doors) with multiple AHUs serving from 100% OA intake to 20% OA intake. |
|
LEEDv4 compliant operable partitions?NC-v4 EQc2: Low-emitting materialsposted by Joanna Switzer on Feb 20, 2017, 2:39 pm
Has anyone had luck in locating CPHv1.1-2010 tested (or alternately Green Guard Gold certified) operable / folding (CSI Division 10) partitions? As a general observation, I am concerned... |
|
PC 112 Calculating costsCredit Forumsposted by Maki San Miguel Paulson on Feb 20, 2017, 5:05 pm
The requirement is to use 25% by cost, of the total value of permanently installed products in the project. I am assuming that this means .25 times the material cost of the project, which is... |
|
phases of project & VOCsNC-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Debra a. Lombard on Feb 20, 2017, 7:23 pm
we are a... |
|
raw material invoice submitalSchools-2009 IEQc4.4: Low-Emitting Materials—Composite Wood and Agrifiber Productsposted by Esther Kohout on Feb 21, 2017, 11:45 am
I am trying to locate the info that shows the total cost of material is to be used in LEED calulations, not including the installation labor. |
|
Flush out for 1 storey high bay warehouseNC-2009 IEQc3.2: Construction IAQ management plan - before occupancyposted by Renaud Gay on Feb 27, 2017, 3:52 am
Hello, We have a 1 storey 30m high... |
|
CI v4 Enhanced Energy Performance Sample FormCI-v4 EAc2: Optimize Energy Performanceposted by Judhajit Chakraborty on Feb 28, 2017, 6:31 pm
This is more of a statement, but I wanted to bring to attention the fact that the LEED CI v4 sample form on the usgbc website (below) for Optimize energy performance contains duplicates of the... |
