Did anyone had ever to explain to the reviewers discrepancy between the area documented in IEQp1 and the total area in PIf3? We had 33% of the total area that were NOT documented in IEQp1.

Dear All, Are elevator shafts included in the calculations of GFA?

Dear forum, We have a very critical problem for a LEED C&S 2009 project located in the north of Mexico. The project will be a 13th story office building.

Dear fellow LEEDusers. Our base building (C&S) has not included a service hot-water system (it will be installed by tenants later) and therefore we modelled the Proposed Building Performance an

Hell all - I've been trying to understand the requirements of the SS 5.1 ACP which allows donation of offsite land in trust.

Hi, We are in the process of doing Energy Simulation for Garments Factory. We have completed the base case part and proposed case is pending.

Hi, We are in the process of responding to the comments we received from the reviewers on the energy model of one of our project performed with eQuest. The reviewer is asking us to provide an inpu

A building pursuing the Development Density and Community Connectivity credit is located within a 2 acres community (8,093,m²), in which existing buildings total 90,000 sq. ft (8,361 m²).

Dear all, I have a question regarding an HVAC baseline model for systems 7 and 8. We have a project located in a very arid zone, where water is very limited.