Forum quick links
Compliance for single story building
Pilot-Credits EQpc78:Design for active occupantsposted by Johnathan Woodside on
The title of the pilot credit implies occupant activeness in general, but the credit focuses significantly on staircases as the means of activity.
IEQ 4.4 - does veneer apply ?
NC-2009 IEQc4.4:Low-Emitting Materials—Composite Wood and Agrifiber Productsposted by Denise Bates on
The credit language states: particle board, MDF, wheatboard, door cores, and laminating adhesive used for assemblies. We have a reconstituted teak veneer that will go on wood panels and doors.
CO2 sensors
NC-2009 IEQc1:Outdoor Air Delivery Monitoringposted by Emmanuel Pauwels on
We are working on an office project. The typical floor will be a completely open space, with workstations and meeting spaces (not enclosed). This will not be a densely occupied space.
Dehumidification + reheat
NC-2009 EAp2:Minimum Energy Performanceposted by Francesco Passerini on
In the designed AHU a cooling coil operates also in order to control the humidity ratio.
Appeal for additional credits after final review.
posted by Zane Lichtneger on
The Standard Preliminary Review is complete and the building has received 57 points. My question is- Can we submit for additional points not included in the initial submission?
LEED v4 for Homes
ND-v4 GIBc2:Optimize building energy performanceposted by Ian Scott on
Our project is mixed with some building 4 stories plus and some 3 stories and less. I have two questions. 1. For the 3 stories and less buildings (Group 2) is there a pathway to achieve 1 point?
Glare Mitigation for Multifamily?
NC-v4 EQc7:Daylightposted by Joshua Radoff on
All, I'm working on a high rise multifamily project, and I can't find anything in the reference guide about whether the ASE requirement applies for residential projects.
Congrats Paula!
posted by Jonathan Rider on
Keep up the great work at Building Green too! I am a LEED AP BD+C and my challenge is to keep up! I instruct in two courses on green building and promote LEED v4 and Building Green in both.
Green Building Consultant as CXA
NC-2009 EAc3:Enhanced Commissioningposted by SAMY Chamy on
Our project cover 135000 Sq.ft factory we get MEP design from MEP Consultant through Contractor. We appoint green building consultant as a CxA .(is it correct).
EPA TARGET FINDER RATING TOOL FOR A SCHOOL PROJECT IN KSA
Schools-2009 EAp2:Minimum Energy Performanceposted by VEL MUTHU on
Hi, I am currently working on a school project located in KSA. we are about to start the EA P2 and C1.