Hi, Is it compulsory to sign a 10 years contract with the solar PV supplier (the PV panels are installed on the rooftop of the project building)?

Dear Concern:- Our client produce huge amount of Renewable energy by wind mills and the energy produced via wind mill is almost 5 times greater than LEED project annual energy consumption so pl

Hi, I have form V01 for WEp1, and I can't find any information to say that this form has been updated (V01 is the only one listed on USGBC forms source), but there was a reference somewhere to an u

Is it an absolute requirement that the proposed pressure (in PSI) matches the baseline. Can we use a flow rate at a lower pressure to avoid excessive pump sizes ?

Can someone please send me the pdf sample from StopWaste.org? I can't open it from here. Thanks! Alexa www.ecopreserve.net

We have a traffic coating product that has VOC below 350g/L, and is compliant with 40 CFR 59, Subpart D (EPA Method 24).

how do you define a simple box model? for example, do you need to model thermal zones, etc.

How do we achieve this credit based only on TI scope of work?

Dear All, Our project building is located in Istanbul/Turkey. Cooling will be provided by centralised two chillers. There is not a cooling tower.

Hello, For our project we are interested in checking the feasibility of control measures outside the LEED project boundary. The municipality where the project is located has a stormwater managem