Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

is a BMS necessary?

NC-2009 EAc5:Measurement and Verification
posted by  Alfonzo Collins  on 

The building we’re for which considering M&V will have 14 submetered apartments (which includes the condensing unit for each), as well as a house meter, for electricity (gas will be on one main

1
Tue Nov 3, 2015, 8:36 pm

Material reuse calculation

NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materials
posted by  Jen Roberts  on 

The second example on pg 536 of the reference guide is a bit confusing.

1
Wed Nov 11, 2015, 4:03 pm

Water Use Reduction Calculator

NC-2009 WEp1:Water Use Reduction—20% Reduction
posted by  Susannah Goddard  on 

I'm hoping to run by our approach to achieving WEp1 by some experienced LEED APs in the hope to reassuring myself that our approach is acceptable before submitting to USGBC at appeal.

1
Fri Nov 27, 2015, 7:21 pm

Aquifer for cooling

CS-2009 EAc4:Enhanced Refrigerant Management
posted by  Erik Nordlund  on 

I have a project where the project team are planning to partly cool the building using an aquifer.

1
Wed Nov 4, 2015, 2:24 pm

VOC Meters

Discuss the LEED Dynamic Plaque and Arc
posted by  Johanna Hendricks  on 

Has anyone purchased a meter for the annual VOC testing? If so, can you tell me the make/model information and if it worked well? Thanks for any help!

0

EQ PC 57 - French feedback

CS-2009 IDc1:Innovation in Design
posted by  Elodie DUMAS  on 

Dear all, A short feedback about our experience concerning EQ PC 57 use, for an office tower project in France (Marseille) under LEED CS V3. For this project, LEED CS V3 and French "HQE" (High Env

0

Withered grass

NC-2009 SSc5.1:Site Development—Protect or Restore Habitat
posted by  Gustavo De las Heras Izquierdo  on 

Our client has planted a mixture of grass species in a vegetated area. Some of the species have withered and only one has remained and keeps growing.

1
Fri Nov 27, 2015, 3:13 am

Substituting v2009 RP category for v4

NC-2009 RPc1:Regional Priority
posted by  Miriam Ramirez Baumgarten  on 

Hi! My project is a LEED NCv2009, I would like to know if it is possible to substitute the complete Regional Priority v2009 category for the Regional Priority v4 category? Thanks! Miriam

1
Tue Nov 10, 2015, 6:13 am

Calculating Ds for LEED 62MZCalc

NC-2009 IEQp1:Minimum IAQ Performance
posted by  William Beechinor  on 

Hello, I am currently trying to calculated Ds for the cooling condition for a project I an working on.

1
Thu Nov 5, 2015, 1:42 pm

Air cleaning for IEQc3.1 Construction IAQ management plan

NC-2009 IEQc3.1:Construction IAQ Management Plan—During Construction
posted by  Marina Radchenko  on 

We are going to apply for 1 point in credit IEQc3.1 but the Contractor is trying to avoid any ventilation during construction: - no natural ventilation - no ventilation by permanent system - no any

1
Fri Nov 27, 2015, 8:20 pm