We have a campus project where FTEs from a number of buildings have access to showers and lockers in a separate "clubhouse" building.

Ours is a campus project where FTEs from a number of buildings have access to showers and lockers in a separate "clubhouse" building.

How would we model a solar tube light fixture in Energy Pro Software? We want to get the light thru it, but not the heat.

This is an academic problem that I need confirmation for. It’s a LEED-NC 2009 project. • 242 FTEs. No visitors, etc. 50:50 gender ratio = 121 of each.

Where would joint compound be categorized? I don't believe it needs to be in the low emitting adhesives and sealants category but I could be wrong. I am currently classifying it under IEQ4.6.

We are working on a development where the project site is composed of two adjacent parcels of land.

Hello We are working on a major renovation project on a 1890's historic building in a very dense historic district.

Hi all For credit compliance can ' Spigot damper with chord diffusers' be used for the rooms that are fed by a single FCU.

As per local regulation Roof garden with grass, other trees using sand in roof is not allowed, Landscape near Building construction area is not allowed for this type of building can we use planter

Does anybody know if performing energy modeling using ComCheck satisfies the requirements for Whole Building Energy Simulation, or is something more extensive required?