Dear Sir:- we have Project in China it is a NC project We don't get Electricity from Government we use natural Gas Generator for Electricity Production.

Dear All, Our project uses a cement based adhesive powder that will be mixed with water and then applied. We have data for the powder that it has 0 g/l VOC, and the applied quantity in kg.

We are renovating a historic residential building and windows will not be replaced. We think it will be difficult to perform a blower door test.

1.Measurements were disappointing July 15 because shading structures are doing their job and blocking direct sunlight - a blessing in Southern Arizona. Should we wait until the nx.

Hi, With the new frequency requirement I am not sure how Company shuttles (that are related to set workshifts and which only operate 8 times a day) would fit into this? The shuttle clearly reduces

On our LEED project we are looking at Option 2 with our participation in a local, formal Commute Reduction Programme.

Trying to determine for EPD tab within BPDO calculator, if the bottom-line of Weighted EPD value needs to be 20 or as long as 20 products from 5 manufacturer's are noted, compliance is met? Also h

I am reviewing the residential unit's EAp2 for Hawaii. The U-value and SHGC in ASHRAE 90.1, Table 5.5-1. The title of table (the first raw) says "Assembly Max.

Thanks for the prompt and kind answer, Marcus. One more thing: Is it possible that baseline SHGC can be smaller than proposed one, even if both are below 0.25 (maximum)? Thanks

Good morning everyone.