Forum quick links
"Conditioned Space?" - Free cooling with outside air
NC-2009 EAp2:Minimum Energy Performanceposted by Victoria Watson on
Hi, I am not sure whether to class mechanical rooms which are free cooled by outside air as "conditioned" for the purpose of the baseline (so the baseline would be on system 5 in this example).
Exemplary Performance
NC-2009 SSc4.1:Alternative Transportation—Public Transportation Accessposted by Evan Griffiths on
Would a subway station seeking LEED certification be likely to receive Exemplary Performance for SSc4.1 by submitting a Comprehensive Transportation Management Plan?
HVAC zone
EBOM-2009 IEQc2.3:Occupant Comfort—Thermal Comfort Monitoringposted by Gabriel Frasson on
I have a project that has fancoils separated by floor.
Variety of species on green roof
NC-2009 SSc5.1:Site Development—Protect or Restore Habitatposted by CT G on
We are working on a project that includes a green roof.
certified projects
posted by Bernadette Stauder-Buschlinger on
certified projects are still displayed and accessible at the new LEED Online?
Fire during construction
CS-2009 SSp1:Construction Activity Pollution Preventionposted by Constanza Cattan on
Dear all, I would like to know if LEED Certification is affected (in any way) if a fire occurs by accident during construction. Thank you.
Off-Site Option for Greenfield?
CS-2009 SSc5.1:Site Development—Protect or Restore Habitatposted by AtSite Inc on
If the site was previously a greenfield do you have the option to do off-site preservation of land to comply or is limiting the site disturbance the only option?
Dual flush - average flow rate and fixture uses
NC-2009 WEp1:Water Use Reduction—20% Reductionposted by Saju Varghese on
Looking at the Water Use Reduction - Additional Guidance in the section for Dual flush, they say: " For the female water closet usage, there is a 1:2 ratio in terms of number of full-flush to low-f
"Determination of Ds Value for worst case scenario"
CI-2009 IEQp1:Minimum IAQ Performanceposted by Cyriac Joseph on
How do we calculate the Ds value for the condition where "The cooling load is low due to minimal envelope and internal loads but the number of occupants are at peak?" We have the following comment
Does mech engineer need to be PE to sign the "signature' box ?
NC-2009 IEQp1:Minimum IAQ Performanceposted by Matt Dem on
Shall the person who enters his/her initials under signatory section ( for example IEQp1 or EAp2-1, 2-2, 2-3 ) be registered mechanical engineer (PE) ?