Log in
Forum » NC-v4 EQp1
Topic

Tab 6-1 and 6-4

NC-v4 EQp1: Minimum indoor air quality performance
posted by Francesco Passerini on Apr 6, 2017, 5:54 am

Art classrooms are considered both in Tab. 6-1 and in Tab. 6-4. If we respect Tab. 6-4, could we avoid the verification of Tab. 6-1 (i.e. could we avoid the outdoor air supply)?

Last reply: Christopher Schaffner, Apr 20, 2017, 11:37 am

Exhaustion rates in WC

NC-v4 EQp1: Minimum indoor air quality performance
posted by Maria Matos on Mar 24, 2017, 3:49 pm

Dear all,

I would like to know if it is mandatory to comply with minimum exhaust rates indicated in TTABLE 6-4 Minimum Exhaust Rates from ASHRAE 60.1 -2010.

We think that the...

Last reply: Christopher Schaffner, Apr 20, 2017, 11:34 am

CO Sensors in Multi-Family Highrise

NC-v4 EQp1: Minimum indoor air quality performance
posted by Jennifer Rennick on Mar 4, 2017, 4:37 pm

For a Multi-Fam Highrise, the corridors will be heated with a ducted roof-top gas furnace split dx system will be installed. No other combustion equipment nor combustion appliances will be...

Last reply: Christopher Schaffner, Mar 29, 2017, 12:37 pm

100% OA constant volume enthalpy heat recovery ventilator

NC-v4 EQp1: Minimum indoor air quality performance
posted by Noriko Nagazumi on Dec 12, 2016, 3:54 am

Hi,
Our project is mechanically ventilated by 100% OA constant volume enthalpy heat recovery ventilator. Regarding monitoring, according to LEED reference guide, in our case, monitoring by...

Last reply: Christopher Schaffner, Jan 26, 2017, 10:45 am

How to calculate Floor Area to be Ventilated?

NC-v4 EQp1: Minimum indoor air quality performance
posted by Vitor Tosetto on Jun 26, 2015, 6:11 pm

Dear, I have one more question, please.

In ASHRAE 62.1-2010 section 6.4.1 there is an explantion about floor area to be ventilated. I didn't understand how calculate the area if there is...

Last reply: Joseph Snider, Dec 15, 2016, 4:47 pm

High Rise Residential with mixed mode ventilation

NC-v4 EQp1: Minimum indoor air quality performance
posted by Nancy Henderson on Aug 18, 2016, 6:30 pm

We have several high rise residential projects that use a several conditioning and ventilation system. Typically the dwelling units are ventilated using whole house exhaust and permanent...

Last reply: Nancy Henderson, Aug 25, 2016, 5:50 pm

Multiple indentical RTUs combined with plenum ducts

NC-v4 EQp1: Minimum indoor air quality performance
posted by Chanyang Shin on Mar 30, 2016, 3:35 pm

Multiple identical RTUs combined with plenum ducts serve a whole building.
How can I prepare 62.1 MZcal?
Can I add up cfm of all RTUs and assume it like one system using one sheet?...

Last reply: Ben Stanley, Aug 18, 2016, 4:13 pm

monitoring

NC-v4 EQp1: Minimum indoor air quality performance
posted by Francesco Passerini on Feb 19, 2016, 2:22 pm

Is the monitoring of mechanical ventilation always mandatory or do exceptions exist?
Regards

Last reply: Ben Stanley, Mar 4, 2016, 3:41 pm

jet fans

NC-v4 EQp1: Minimum indoor air quality performance
posted by Francesco Passerini on Feb 2, 2016, 1:25 pm

Table 6.4 of ASHRAE 60.1-2010 states that parking garages that don't have walls that are at least 50% open to the outside shall have mechanical air extraction (exhaust ventilation). Can jet fans...

Last reply: Francesco Passerini, Feb 23, 2016, 6:35 am

Single supply system

NC-v4 EQp1: Minimum indoor air quality performance
posted by Gustavo De las Heras Izquierdo on Jan 28, 2016, 2:40 pm

Does anyone know a definition for "single supply system". I've looked it up in ASHRAE 62.1 and ASHRAE's Manual and I wasn't able to find it.

Last reply: Ben Stanley, Feb 16, 2016, 6:24 pm