I am doing the calculations for the "daylight factor method" for Daylight and Views credit. It is an office floorplate that is roughly 150'x150' with an inner core.

Hello everyone, New to LEED, and I have been trying to figure out who determines what is native and what is adaptive? Need to put a list together for the project that I am working on.

Total lighting load for project space under EAc1.2 would be the same as connected lighting load under EAp2?

Total lighting load for project space under EAc1.2 would be the same as connected lighting load under EAp2?

hi there, here's what will probably be an easy question for you but is stumping me, as this is my first time documenting this credit.

We've conducted the differential pressure test and the average is around 7 pa. We've had the contractor test the room and report the results on the LEEDUser form.

Hi all In my LEED CI project the tenant are sub metering their energy usage and are then paying the building the owner for the amount of energy used.

There is an attached building to the building we simulate. Should thiis attached building be simulated in the proposed and baseline building or should it be exluded?

Dear all, the company which does the site development of our project has entered a two-year power contract (100 % green power).

Does this require testing after it is in place?