I have a fit out project which is occupying a new core and shell building.

I’m modeling a building for C&S in France. Normally in my baseline and proposed models I put the same infiltration (n50 = 0.14 ach) for both buildings.

I guess there are a few clarifications necessary for me to see if the project meets. It says that 'Homes' is an applicable rating system - does this apply to single family - I would assume yes.

What MET rate would you assume for the ASHRAE-55 compliance for retail areas (ie. supermarket, clothes retail)?

Hi! I'm finishing a project and must indicate the levels to be configured in ppm CO2 sensor environments. As an example, I have a training room with 8 people and an area of ​​497.29 sf.

I’m working on a facility that has several concession areas that are enclosed with a solid roll up door that are open to the outside when occupied. The space is occupied only during event.

For materials that were removed during demo and then re-used during construction, can you count these materials as salvaged as well as regional, meaning can you count the cost twice?

Courtney, we have a similar situation to yours in that we do not have access to whole building utility data. We are currently in the process of certifying several large multi-family projects under

Hi, If an AHU (initially outside of the scope of work) had to be modified in order to comply with the ventilation requirements of Standard 62.1-2007, does it have to comply with the requirements

what is the definition of a non-LEED-certifiable building? does it mean your not going to attempt to certify them or that they dont qualify/meet minimum requirements?