Forum quick links
Licensed Professional Exemption
posted by Ameet AA on
Hi James with regards to Licensed Professional Exemption please find the details at the bottom of the page in the following link https://www.leedonline.com/irj/servlet/prt/portal/prtroot/docs/gui
Electric Bike Fleets are ZEV's so...
Healthcare-v2009 SSc4.2:Alternative transportation - bicycle storage and changing roomsposted by John Chinnery on
What are the best ways to maximize the value of a network of ebikes. This ZEV fleet would be checked out for clean trips and returned to storage when done.
Clean Room Protocol and SMACNA standards
NC-2009 IEQc3.1:Construction IAQ Management Plan—During Constructionposted by Charlie Popeck on
We are currently working on a LEED project where a significant portion of the finished space will classify as “Clean Room” under ISO 14644-1.
Status Group Project Certification
posted by Elke Malleier on
I am a LEED AP and a “newcomer” in the certification process. As AGMBC Guidelines are not clear to me, I went through the forum comments below but I am totally confused now.
New credits during appeal: does work have to be finished?
posted by Elle Brown on
Our client is considering pursuing new credits during the appeal of our final construction review.
FTE calculations for Mixed Use
NC-2009 PIf3:Occupant and Usage Dataposted by Tarek Saleh on
all, I'm new to the site, but have been browsing most of the comments related to FTE calcs, but I still haven't found what I'm looking for.
Simple re-submittal question
posted by Maura Adams on
Hi all. I just re-submitted a number of credits that were rejected the first time around.
Terrazzo Sealer Question
NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealantsposted by Todd Bundren on
What is the VOC limit for a Terrazzo Sealer? I'm a bit confused about which category it falls under (Sealer, Floor Coating, or other).
LEED for Homes Window SHGC
posted by Sara Heppe on
I am working on a project in a zone 1 climate. Currently our house shows that it has a 34% window to floor area ratio (WFA).
Wood Assembly and Regional Materials
NC-2009 MRc5:Regional Materialsposted by Denice Staaf on
This is a constant question in the wood industry and I am not sure how to answer it.