Looking for consensus on whether it is required for compliance with 62.1 for this prerequisite to provide ventilation for laundry rooms within dwelling units of a high-rise residential tower?

The MEP on our project has designed the AHUs to have filters in series for the pre-heat coil (MERV 11) and chilled water coil (MERV 8).

Hello, I would like to know, if I can count the regularly occupied space looking to the inner courtyard? I know it says "direct line of sight to the outdoor environment".

Has anyone had success in using this as an innovation credit for a health care project (or any project) registered under LEED NC or LEED CI?

Has anyone had success in using this as an innovation credit for a health care project (or any project) registered under LEED NC or LEED CI?

If I use the daylight measurement method for IEQ 8.1, is there a certain time of day the measurements must be taken? Thanks

The project at hand is ~500,000 sf and contains 4 buildings, each with 2 sub-floors, a ground floor, and between 4 and 11 stories and a district heating source.

We are applying for a CS project which primarily will house research labs.

Hi, I have a doubt related to the service hot water system for the baseline building.

hi, I want to know if somebody can tell how many time takes a review for Precertification for a project with more 300,000sf of gross floor area of the project building?