we will be preparing our ND project for Stage 2 certification in the course of the next few months and we have the LEED boundary pretty much staked out.

In our project a absorption chiller will be used to cover part of the cooling load. The chiller will run on lithium bromide / water solution.

I don't have my LEED Reference Guide with me. I am working on a Lab. There is millwork included in Division 12 for the Casework.

Hello everyone! As promised, we finally have feedback forms for the LEED 2009 ACPs for Projects Outside the U.S. available for you on the USGBC website.

The definition for roof area indicates that only the roof area directly above the Gross Square Footage should be used for the Option 1 - 75% calculation.

Our project sits on a lot that was subdivided out from a larger parcel in the past.

Hi My questions conserns calculation of VOC:s from technical & garage spaces.

We have a master plan campus project for which we are trying to acheive several credits which, once achieved, can then be easily shared and applied for in the 3 individual projects which will event

Dear all, one of our major clients set an interesting question concerning electronic cigarettes.

Hi, I have a question about baseline building HVAC minimum efficiency.