I am working with a client that is looking at multiple new spaces in multiple locations.

If an energy model has been reviewed during design phase submission and PVs are added during construction but were not included in the model, can the model be rerun and resubmitted during the const

I am working on a project (LEED CS 2.0) that easily meets the services requirement, but I'm having a hard time with the residential density requirement.

The credits seem to be accumulating annexes, for example, after uploading an annex in the templates for the SS 4.1 credit, it appears later in the following credits as an upload, even for templates

HI Everyone, I am working on a LEED-NC v2.2 project which is small but has three technologies that reduce peak demand which is critical here in Connecticut. My question is how to calculate that %

Due to space constraints, our vestibules were not able to be a full 10' wide between our doors, thus the recessed walkoff mats aren't 10'.

I have a EBOM project where we have provided documentation for WEc2 and have exceeded the threshold for the RPC.

LTprerequisite1- Case 1- What happens is the new development footprint exceeds the previously developed portions of the site?

I have few clarification of whether the old constructed portion material should be considered for all the materials credits. The building has been developed by the developer which including the st

We are in the process of modelling/simulating of office building in LEED C&S 2009 for EAp2 and EAc1 – Option 1. Building is divided into two parts: owner occupied space and offices for rent.