Forum quick links
Option 1: Discounted Rate for LE/FE Vehicles
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by AshLee Eustace on
For the 20% discounted rate, is there any minimum amount that must be charged for parking?
What is a "date-stamped photo"?
NC-2009 SSp1:Construction Activity Pollution Preventionposted by Jean Marais on
What is a "date-stamped photo"?
Record Time for ASHRAE appx G Simulation?
CS-2009 EAp2:Minimum Energy Performanceposted by Jean Marais on
What's your record time? What software did you use?
Energy Star Portfolio Manager Naming
NC-2009 EAc5:Measurement and Verificationposted by April Ambrose on
PIf4 says: Note: Project titles in portfolio manager must be the same as the LEED registered project name.
Construction Add Alternates
Schools-2009 WEc3:Water Use Reductionposted by Lauren Fakhoury on
In the State of Maryland, part of the construction project must contain a percentage of "add alternates" to a project.
Thermal blocks for multifamily residential building
NC-2009 EAp2:Minimum Energy Performanceposted by Emma Eliasson on
I have a question about thermal blocks in multy family residential buildings. I'm working with a building that has 4 floors and totly 7 appartments.
EA Cr-1 - Process Energy Cost less than 25%
Schools-2009 EAc1:Optimize Energy Performanceposted by April McGee-Flournoy on
Project K-12 school, The enegry calculation done for the entire building but the process enegry cost comes less than 25%.
Does the 63º H reduction procedure only apply to interior ledge
NC-2009 IEQc8.1:Daylight and Views—Daylightposted by Jean Marais on
Does the 63º H reduction procedure only apply to interior ledges? Can one use interior windows for window bays though a glass vestibule?
Perscriptive method - Bay Depth to Core
NC-2009 IEQc8.1:Daylight and Views—Daylightposted by Jean Marais on
What happens if my WFA*VT is too large because my bay is only as deep as to the back wall? Do I have too much window and therefor don't have good daylighting? WFA*VT Should be 0.15 to 0.18
LEED Retail CI customer and FTE calculations
CI-2009 WEc1:Water Use Reductionposted by Jeanne Varney on
For LEED Retail CI, to calculate the WEc1 water reduction you have to input the number of FTE's as well as customers.