Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Option 1: Discounted Rate for LE/FE Vehicles

NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehicles
posted by  AshLee Eustace  on 

For the 20% discounted rate, is there any minimum amount that must be charged for parking?

1
Sun Sep 4, 2011, 3:07 am
1
Thu Aug 11, 2011, 4:56 pm

Record Time for ASHRAE appx G Simulation?

CS-2009 EAp2:Minimum Energy Performance
posted by  Jean Marais  on 

What's your record time? What software did you use?

1
Sat Oct 1, 2011, 12:04 am

Energy Star Portfolio Manager Naming

NC-2009 EAc5:Measurement and Verification
posted by  April Ambrose  on 

PIf4 says: Note: Project titles in portfolio manager must be the same as the LEED registered project name.

1
Tue Oct 25, 2011, 7:09 pm

Construction Add Alternates

Schools-2009 WEc3:Water Use Reduction
posted by  Lauren Fakhoury  on 

In the State of Maryland, part of the construction project must contain a percentage of "add alternates" to a project.

1
Fri Sep 2, 2011, 2:34 pm

Thermal blocks for multifamily residential building

NC-2009 EAp2:Minimum Energy Performance
posted by  Emma Eliasson  on 

I have a question about thermal blocks in multy family residential buildings. I'm working with a building that has 4 floors and totly 7 appartments.

1
Fri Aug 26, 2011, 3:35 am

EA Cr-1 - Process Energy Cost less than 25%

Schools-2009 EAc1:Optimize Energy Performance
posted by  April McGee-Flournoy  on 

Project K-12 school, The enegry calculation done for the entire building but the process enegry cost comes less than 25%.

1
Fri Aug 12, 2011, 3:38 pm

Does the 63º H reduction procedure only apply to interior ledge

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Jean Marais  on 

Does the 63º H reduction procedure only apply to interior ledges? Can one use interior windows for window bays though a glass vestibule?

1
Thu Aug 18, 2011, 12:58 pm

Perscriptive method - Bay Depth to Core

NC-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Jean Marais  on 

What happens if my WFA*VT is too large because my bay is only as deep as to the back wall? Do I have too much window and therefor don't have good daylighting? WFA*VT Should be 0.15 to 0.18

1
Thu Aug 18, 2011, 12:52 pm

LEED Retail CI customer and FTE calculations

CI-2009 WEc1:Water Use Reduction
posted by  Jeanne Varney  on 

For LEED Retail CI, to calculate the WEc1 water reduction you have to input the number of FTE's as well as customers.

1
Wed Aug 31, 2011, 3:40 pm