Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Schedule of Values from GC - can we use the 45% default in EBOM?

EBOM-2009 MRc3:Sustainable Purchasing—Facility Alterations and Additions
posted by  candice groves  on 

In LEED NC, when given a price from a subcontractor, we're able to use a 45% default for the actual material cost in order to exclude labor from that price.

1
Fri Jun 24, 2011, 8:58 pm

Pool SRI

CS-2009 SSc7.2:Heat Island Effect—Roof
posted by  Luis Miguel Diazgranados  on 

Hi What about a pool? In this project we are working on, there will be a pool in a terrace on the roof. What would it be it's SRI? Or does it depends on the tiling used under water?

1
Fri Jun 24, 2011, 7:31 pm

Classroom and Lecture Halls Building on a University Campus

EBOM-2009 EAp2:Minimum Energy Efficiency Performance
posted by  Lisa Chow  on 

Hello, My building is located on a university campus and contains just 2 classrooms and 3 lecture halls (~15.5 ksf).

1
Sun Nov 20, 2011, 3:26 pm

Clarification of wording

Schools-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Gary Atkins  on 

In attempt to clarify the wording for IEQ4.1 and IEQ4.2 that states "...defined as inside the weatherproofing system and applied on-site..." does this mean that both conditions must be satisfied fo

1
Sat Jun 25, 2011, 12:27 am

Additions to Credit Language

Pilot-Credits PC2:PBT Source Reduction: Dioxins and Halogenated Organic Compounds
posted by  David Weimann  on 

Hi Brendan, pilot credit 2 obviously correlates with Green Guide for Healthcare EP Credit 3.1-3.5 "Toxic Chemicals Reduction".

0

Climate zone outside the USA

NC-2009 EAp2:Minimum Energy Performance
posted by  Xing Shi  on 

We just finished the design submittals of 2 projects in Jiangsu, China. Does ASHRAE set climate zone in China.

1
Mon Jun 27, 2011, 6:10 pm

Average time expenditure for LEED Project Administration

LEED Rating System Selection
posted by  KC Kurtz  on 

All -- I work for a small Design-Build company in Durham, NC and we are looking to certify our new office building (12,000 sq. ft adaptive reuse) through LEED Core and Shell Rating system.

1
Mon Jun 27, 2011, 7:03 pm

Showing a reduction?

EBOM-2009 SSc6:Stormwater Quantity Control
posted by  American University  on 

I'm unclear as to how we show a reduction in stormwater runoff. I see how we calculate the current runoff by figuring the area type and using the formula given, but what does that get compared to?

1
Fri Sep 2, 2011, 3:19 am

Process loads different between proposed & baseline designs

NC-2009 EAc1:Optimize Energy Performance
posted by  Santiago Rodriguez  on 

For a major renovation of a restaurant they have made a major substitution of old kitchen appliances to new, more efficient equipment.

1
Mon Jun 27, 2011, 6:38 pm

When to use Table vs. Spec rated power

CI-2009 EAc1.4:Optimize Energy Performance—Equipment and Appliances
posted by  James Shook  on 

Can someone clarify when to use the Table 2 rated power number vs. specification rated power. My example: Have 90 new computer monitors going into the project.

1
Mon Dec 19, 2011, 10:14 pm