Topic | Recent |
---|---|
Representative FloorplansGeneral forumsposted by Shannon Gray on Apr 6, 2010, 9:22 am
Yes, this linked document would be a floor plan that was uploaded as the part of the general project documents. The intent here was to make things easier on us. But, in reality it doesn’t work... Last reply: Tristan Roberts, Oct 8, 2010, 10:10 am |
|
Foreign Country Energy Star RegistrationNC-2009 EAp1: Fundamental Commissioning of Building Energy Systemsposted by David Herrera on Sep 30, 2010, 10:13 am
Hello Everyone, I am trying to complete the Commissioning process for a multi-family building located in Mexico. I haven´t been able to create an account with Energy Star, due to the fact... Last reply: Tristan Roberts, Oct 8, 2010, 11:02 am |
|
Required Contractor SignatoryNC-2009 IEQc5: Indoor Chemical and Pollutant Source Controlposted by Kenneth Lynch on Oct 5, 2010, 4:18 pm
I've got a fairly simple question that perhaps I'm just reading too much into, but hopefully someone can help me out. On the Online template for this credit, the first required signatory... Last reply: Tristan Roberts, Oct 8, 2010, 11:05 am |
|
DocumentationCS-2009 EAp1: Fundamental Commissioning of Building Energy Systemsposted by Robyn Williams Heeks on Oct 6, 2010, 3:04 pm
It appears to me that neither the... Last reply: Tristan Roberts, Oct 8, 2010, 11:19 am |
|
Equipment Maintenance LogEBOM-2009 IEQc3.4: Green cleaning - sustainable cleaning equipmentposted by John Ida on Oct 4, 2010, 7:03 pm
The Reference Guide states that the project needs to "Keep a log for the repair and maintenance of any cleaning equipment used at the project site". The sample maintenance log shows equipment... Last reply: Tristan Roberts, Oct 8, 2010, 11:31 am |
|
Glass SRIEBOM-2009 SSc7.2: Heat island effect - roofposted by Marc Mondor on Oct 8, 2010, 11:27 am
Has anyone had any experience with glass roofs? We are working on a greenhouse and need some advice on calculating the area covered in glass. I assume that this cannot be considered one large... Last reply: Tristan Roberts, Oct 8, 2010, 11:36 am |
|
Option 3- MeasurementCS-2009 IEQc8.1: Daylight and views - daylightposted by Maya Karkour on Sep 29, 2010, 6:40 am
Hello, Using this option, the LEED guidance requires to demonstrate through records of indoor light measurements that a minimum daylight illumination level of 25... Last reply: Tristan Roberts, Oct 8, 2010, 11:54 am |
|
Building Area MethodCI-2009 EAc1.1: Optimize energy performance - lighting powerposted by Simon Sue on Oct 8, 2010, 4:34 am
If i were to use Building Area method to do my calculation, what building area types i should used for bank? Last reply: Dane Sanders, Oct 8, 2010, 12:27 pm |
|
Re: What System to Use for Industrial Existing BuildingsGeneral forumsposted by David Posada on Oct 8, 2010, 12:28 pm
We faced similar questions for a project that got certified under NC, but in your case CI may make the most sense. We had several communications with the USGBC (this was pre-... |
|
Gas Fired EquipmentNC-2009 IEQc3.1: Construction IAQ management plan - during constructionposted by Christopher Dewey on Sep 27, 2010, 3:48 pm
There is a project proposing temporary heating be provided by propane torpedo heaters for the winter. Do these heaters qualify as gas fired equipment that need to be exhausted to the outside?... Last reply: Tristan Roberts, Oct 8, 2010, 12:30 pm |