Hi, We are a tenant occupying 30% of a multi-tenant building. The office was last renovated in 2011.

I have a sample Basis of Design document that applies to LEED 2.2. Not sure if there are any differences in the requirements for the document required in LEED 2009.

I am working on a LEED for Healthcare v2009 project, and I'm wondering if I have to track food service equipment?

Hello everyone. I was wondering if triage assessment rooms need to be considered workstations since this is where patients are going to be evaluated before admission.

I see that REACH is listed as an international compliance path, what about a US based project that is using some REACH compliant materials - some specialized application flooring, for example, is m

We are working on a five-stories senior home, which program-wiise is very much like a dorm. From the ratings descriptions it seems we could for either NC, Homes or Mid-rise Residental, correct?

Our project is pursuing Option 1 Path 2 - Flush During Early Occupancy. Do filters need to be replaced after the flush, or only after construction as part of IEQc3.1?

For the first year of construction, our project site area was smaller than the area that requires SWPPP inspections/reports.

The current credit uses ppm units for all equipment. This is not a common measurement used or documented for generators.

This is with regard to an open air shopping plaza, which is registered as a group project with 7 structures. We received guidance to follow the “Treatment of District or Campus Thermal Energy in