Forum quick links
Proving compliance with other 3rd party tests
NC-v4 EQc2:Low emitting materialsposted by F. Borja López Calle on
Hello,
Hotel HVAC (electric) and DHW (gas) systems
NC-2009 EAp2:Minimum Energy Performanceposted by Ricardo Sá on
Am I right to assume in the baseline building:
LEED CI V4 from LEED CS 2009
CS-v4 SSc7:Tenant design and construction guidelinesposted by Belén Valladares López on
We are working with a project that falls under LEED CS 2009. We are pursuing credit SSc9 tenant desing & construction guidelines, but as the building is under construction any future commercial
Defining a product
Pilot-Credits MRpc52:Material multi-attribute assessmentposted by Xavi Ramon on
Dear Mr Mrs,
Landscape lighting
CS-v4 SSc6:Light pollution reductionposted by Ricardo Sá on
I am designing the lighting system for 3 major office buildings. Around the building and in some balconies, the architect will specify some green areas and small gardens.
step controls per Section 9.4.1.2a
NC-v4 EAp2:Minimum energy performanceposted by Francesco Passerini on
The v4_Minimum Energy Performance Calculator_v05 states that "Mandatory step controls are included in the proposed, and modeled in the baseline for all spaces enclosed by ceiling height partitions
DES Path 1
NC-v4 EAc7:Green power and carbon offsetsposted by Francesco Passerini on
The Reference Guide at p. 460 states:
"For any projects using energy model Path 1, green power and offsets used in a DES do not contribute toward the credit for connected building".
renewable energy sold to the grid
NC-v4 EAc2:Optimize energy performanceposted by Francesco Passerini on
In order to calculated the points relative to NC-v4 EAc2 - Optimize energy performance shall the produced electric energy from a renewable source that is sold to the national gri
Transportation rate threshold between 45% and 50%
EBOM-v4 LTc1:Alternative transportationposted by Laura Danzig on
Hi all,
IEQ CREDIT 4.3
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Carlos Salas on
hola, en un ensayo de emisiones COV, ¿el formaldehido se debe tener en cuenta? Un suelo técnico formado con una madera encapsulada metalica, debe cumplir el test CPHD?
Gracias.