Our project is located in an urban environment, we are just a few yards short of fulfilling the requirements. Our project is expected to have as little as 5 FTEs, potentially even less.

We would like achieve points for the credit: Renewable Energy Production. The design team is considering an Aquifer Therma Energy Storage (ATES) in combination with a heatpump.

The Definition of interior/exterior in the LOW-EMITTING MATERIALS credit is a bit confusing for me.

According to the LEED v.4 credits, it is possible to use different emission tests outside the US to comply with the requirements. AgBB and DiBt testing method (2010) are mentioned there. But accor

The LEED User "Powered Equipment Inventory" Worksheet, located under the "Documentation Toolkit" tab provides guidance on performance metrics as follows: How to document performance based on the ma

Hello, Using the Annexe 1 C&S default occupation values, a hotel would have FTE plus Transient occupants.

Hello, We have a project where some luminaires have more power than what it is required by the mandatory provisions of exterior lighting power.

LEED v2009 C&S Our project consists of seven individual LEED projects on a campus site. Each of these seven projects/buildings has several different uses/space types (e.g.

Hello all, we are going to use ASHRAE 90.1-2010 for our LEED v2009 project in Germany. One problem pops up recently.

We are pursuing LEED credits for a Workshop/Office Building in Munich Germany.