Our project is an office building where groundfloor is componed by retails and services dedicated to unknown tenants. Taking into account that this is a CS certification, do we need to install ent

Hi! Toilet (Water Closet); Urinals; Private Lavatory Facuet; and Showerheads all need to be WaterSense Labelled. However- what are the equivalent labels?

LEED v4 describes to install a permanent entryway systems at least 10 feet (3 meters) long in the primary direction of travel, to capture dirt and particulates entering the building at regularly us

Hi,

how can I get access to the refrigerant impact calculation (on Leedonline.com) before registering in order to advice the planners if their selected refrigerant complies?

Hi,

under "LEEDuser’s viewpoint" your only refer to Option 2:

Hi,

Is the Case 1. commercial or institutional projects applicable for an office building ? 

In "WEc2: Indoor water use reduction" WaterSense labeled fixtures are obligatory:

Dear all, my 2 question refer to the rainfall events calculator. 1) the percentil is calculated on the historical data sheet. The amount is expressed in mm.

I have multiple office projects where there is no consumption data available as the tenants are new to the building- we are going with Option 2 Minimum Energy Performance. 

I am somewhat confused comparing the requirements of C&S and New Construction.