Under what category should I assign the Sherwin Williams Pro Industrial Pro-Cryl Universal Primer? This is an acrylic primer.

Our LEED boundary has a power line easement running through it. The city's zoning doesn't allow development in this area.

I'm filling out the information from the energy model to the LEED v4 Minimum Performance Calculator and i noticed a check mark next to each end-use when filling out energy consumption and power dem

Our project is a small pavilion in a park, with tenant space for a food outlet, and (separate) restroom facilities to serve park users.

For the final cleaning bid package, in our specifications, there is no language requiring that the chemicals used have to be low VOC.

If a LEED project boundary only includes a building addition, would the Addition natural gas, electricity and water utilities need to be separately submetered if fed from main building utility serv

SCS certified EPDs are not yet approved?

Our project is a classroom and faculty office building with an occupancy calculated at 89 FTE and 707 peak transients located on an urban college campus .

We're working on a project where in order to comply with local noise regulation requirements, the Proposed design required indoor air handling equipment with fully ducted exhaust/intake air connect

In v2009, you could use 3.6 GPF blowout toilets in institutional uses, but could not show savings for using blowout toilets with lower flow.